EN 42CrMoS4 W.Nr 1.7227 Alloy steel
42CrMoS4 MATERIAL TYPE: Quenched and tempered steel
42CrMoS4 MATERIAL STANDARDS: ISO 683/18
42CrMoS4 CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.45
Si (％): 0.10 ~ 0.40
Mn (％): 0.60 ~ 0.90
P (％)≤: 0.035
S (％)≤: 0.020 ~ 0.040
Cr (%): 0.90 ~ 1.20
Mo (%): 0.15 ~ 0.30
42CrMoS4 MECHANICAL PROPERTIES
Diameter ≤ /size mm: 16
Mechanical property ≥|σb/MPa: 1000~1200
Mechanical property ≥|σs/MPa: 800
Mechanical property ≥|δ5(%): 11
Mechanical property ≥|AkU /J: 25
Hardness via Annealed /HBW: 223
Diameter ≤ /size mm: 16 ~ 40
Mechanical property ≥|σb/MPa: 900~1100
Mechanical property ≥|σs/MPa: 650
Mechanical property ≥|δ5(%): 12
Mechanical property ≥|AkU /J: 350
Hardness via Annealed /HBW: 223
42CrMoS4 PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
42CrMoS4 TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
42CrMoS4 PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Custom
Assurance
Brand
Logistics