MATERIAL CATEGORY: W.Nr 1.3401 X120Mn12 Manganese Steel Plate
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness. The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS
DIN EN 10083-2 (2006), DIN 17200 (1987)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 1.10 ~ 1.30
Si (％): 0.30 ~ 0.50
Mn (％): 12.0 ~ 13.0
P (％)≤: 0.100
S (％)≤: 0.040
Cr (％): ≤ 1.50
Mo (％): -
Ni(％): -
Hot working temperature /℃: 1100～850
Heat treatment temperature /℃| annealing: -
Heat treatment temperature /℃| Normalizing: -
Heat treatment temperature /℃| Quenching: 1000~1050 water
Heat treatment temperature /℃| Tempering : -
Hardness after annealing ≤HBS: -
Steel dimension /mm: ≤16
|σb≥/MPa: 880 ~ 1130
|σs≥/MPa: 410
|δ5≥/(%): 40
|ψ≥/(%): 40
|AKV≥/J: 124
Steel dimension /mm: 17 - 40
|σb≥/MPa: 830 ~ 1080
|σs≥/MPa: 390
|δ5≥/(%): 42
|ψ≥/(%): 40
|AKV≥/J: 124
Steel dimension /mm: 41 - 100
|σb≥/MPa: 780 ~ 1080
|σs≥/MPa: 345
|δ5≥/(%): 45
|ψ≥/(%): 45
|AKV≥/J: 137
AVAILABLE SHAPES
Black bar / Flat bar / Square bar / Pipe / Steel strip / Sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 1000mm
Plate / Steel strip: 0.1mm to 1000mm
Width: 8mm to 2500mm
Steel sheet: thickness 0.50 ~ 4.0mm, width 100mm X length 1000/2000mm - Standard size
Length: random length or based on the customer's special requirement
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Custom
Assurance
Brand
Logistics